The OZC bar V.2.0....

chadjaja

On the way back!
Feedback - 100%
31   0   0
Well Sunday arvo we knocked up the new collar for the chest freezer that replaced my old one that died. Still second time around its a piece of piss though with lessons learnt from the first.

Basically 4 sides of 19mm wood with smaller also 19mm thick batons running along the top and bottom inside to give a better surface area to stick it down and for the fridge seals to sit. The middle then gets plugged with polystyrene to insulate and its easy to cut it and wedge it in nice and tight. Gas line feeds thru from outside and so to the temp probe. The wire basket is perfect to mount the pc fan blowing cold air on the back of the tap shanks and hold my hops, candi sugar and stubbies of yeast sit on the compressor hump. A suction cup bathroom shelf serves as drip tray.. .(holding out for a new stainless one)

Its still going to get some more bling with some decals I have planned to work with the funky red collar . A fourth tap hole is plugged up ready and awaing a fourth tap. I'm pretty happy with end result. Upgrades will include a 5 valve manifold, more kegs (can fit two on the hump and maybe wheels. Going to be a hit this summer I think. At least two Admin have hit the bar since Sunday :D

Currently on tap are
Amarillo golden ale
Tellerwasser (orange honey wheat beer)
BJ's Dubbel (strong Belgian ale)
:thumbsup:

DSCF2809.jpg


DSCF2813.jpg


DSCF2815.jpg


DSCF2807.jpg
 
SENSATIONAL :)

I am not much of a drinker but if you put wheels and a motor on it, swing past my place with that little ripper and I will start binge drinking :lol:
 
Back
Top Bottom